Aluminium Windows & Doors Cost in Ghana (2026)
How much do aluminium windows and doors cost in Ghana? Honest 2026 ranges — windows from ~GH₵100 and doors from ~GH₵50 (Jiji entry listings, indicative), and why a per-window installed figure is genuinely on survey. What drives the price: size, glazing, system, thermal break, finish. Aluminium Installers Ghana, since 1988.
How much do aluminium windows and doors cost in Ghana? On honest 2026 figures, the headline entry anchors are real but small: aluminium windows from about GH₵100 and doors from about GH₵50 on Jiji marketplace listings — but those are entry unit starting points, not installed prices. A finished, fitted window is genuinely quoted on survey, because the opening size, the glazing, the system and the finish decide the figure. Aluminium Installers Ghana has fabricated and installed aluminium windows and doors across Ghana since 1988, and our cost answer is deliberately honest: we give you the real listing references, and we tell you why the installed number waits for the survey.
How Aluminium Windows & Doors Are Priced
An aluminium window is not a single rate. The figure is built from layers, and the marketplace listing price is only the first one:
- Listing vs installed — a Jiji listing price and an installed window are different numbers. The listing is a unit starting point; measuring, glazing, fixings, sealing and fitting are the rest of the installed cost.
- Size of the opening — a large opening uses more frame, more glass and more labour than a small one, so size is a primary driver before anything else.
- Glazing (single vs double) — single glazing is lower-priced; double glazing costs more but cuts heat gain and noise, which matters on a sun-facing or roadside elevation.
- System (casement / sliding / tilt-and-turn) — a sliding window is typically lower-priced; a casement more; a tilt-and-turn more again, because of the hardware and engineering.
- Thermal break — a thermally broken frame costs more and improves thermal performance; a standard frame is lower-priced.
- Finish — powder-coat (RAL) or anodised, specified for colour retention through Accra’s sun and humidity.
Because these vary opening by opening, the figures below are indicative entry anchors. The firm number comes from a survey.
Indicative Cost Anchors
The figures below are real market references for 2026, each flagged indicative and each confirmed on a free survey before any work is committed. They are entry listing unit prices — none of them is an installed per-window figure.
Aluminium windows & doors (GH₵)
| Item | Indicative figure | Note |
|---|---|---|
| Aluminium window (entry) | “from ~GH₵100” | Jiji entry listing → indicative, unit not installed |
| Aluminium door (entry) | “from ~GH₵50” | Jiji entry listing → indicative, unit not installed |
| Installed per window | ”on survey” | size, glazing, system, finish, access decide it |
| Installed per door | ”on survey” | size, glazing, system, finish, access decide it |
(Indicative 2026 marketplace entry references, single-source. These are entry unit starting points only — they are not installed per-window or per-door prices, and they do not name the size, glazing or system, which change the figure. Firm quote on survey.)
What Drives the Price
The installed figure moves on five things that can only be confirmed against the actual openings:
- Size — the opening dimensions set how much frame, glass and labour the window needs.
- Glazing — single glazing is lower-priced; double glazing costs more but cuts heat and noise. On a sun-facing or roadside elevation, double glazing earns its keep.
- System — a sliding window is typically lower-priced, a casement more, and a tilt-and-turn more again, because of the hardware and the engineering behind the action.
- Thermal break — a thermally broken frame costs more and improves the window’s thermal performance; a standard frame is the lower-priced option.
- Finish — powder-coat (RAL) or anodised, chosen for durability and colour retention through the climate.
This is why the honest answer for a fitted window is “on survey” — and it is the differentiator. The listing anchors above are real entry references; the installed number is committed only after the openings are measured, never before.
Value Over Time
A lower-priced single-glazed standard-frame window wins on the upfront listing line, but the value question runs longer than the first invoice. A double-glazed, thermally broken, well-finished window holds out heat and noise, holds its colour through Accra’s sun and humidity, and seals properly against driven rain — so it performs for years and is rarely replaced early. A lower-priced entry window with single glazing and a basic finish costs less to buy and can let in more heat and noise, and may need attention sooner. Neither is “better” outright: the right call is the glazing, system and finish that suit the building’s use and elevation. We specify to the building and tell you which you are getting, so the cost decision is made with the full picture rather than on the listing price alone.
Performance Standards
Where window performance is specified, it is tested against real standards, and we specify to them rather than claim a rating a window does not hold:
- ASTM E283 — air leakage (infiltration) of windows, doors and curtain walls
- ASTM E331 — water penetration under static pressure difference
- ASTM E330 — structural performance (wind load) of windows, doors and curtain walls
- EN 1090 — execution of aluminium structures (-1 conformity/CE, -3 aluminium); the fabrication and install discipline behind the frames
- Finish — powder-coat (RAL) or anodised, specified for weathering and colour retention
How to Get an Accurate Quote
The anchors on this page are entry references, not your price. Your installed figure depends on the opening size, the glazing, the system, the thermal break and the finish — which is exactly what a survey confirms. Aluminium Installers Ghana provides a free survey: a surveyor visits, confirms the openings, glazing, system and finish, and returns a firm itemised quote. No fixed installed price is committed before the openings are seen. Call +233 27 011 3728 to book your free survey.
Areas We Serve
Aluminium Installers Ghana prices and installs aluminium windows and doors across Greater Accra — Airport City, Ridge, Cantonments, the CBD, Tema, East Legon, and Spintex — plus Kumasi and Takoradi.
Related Services
- Aluminium Window Systems — casement, sliding, tilt-and-turn
- Aluminium Louvres & Brise-Soleil — solar shading and ventilation
- Curtain Wall Installation — stick and unitised facades
- Structural Glazing — frameless and bonded glazing
- 10-Year Aluminium Warranty — what the warranty covers
Frequently Asked Questions
How much do aluminium windows cost in Ghana? Indicatively, aluminium windows start from about GH₵100 and doors from about GH₵50 on Jiji listings — entry unit starting points, not installed figures. An installed window is priced on survey, because the opening size, glazing (single/double), system (casement/sliding/tilt-and-turn), finish and access decide it. Indicative references, confirmed on a free survey — never a fabricated fixed installed price.
How much do aluminium doors cost in Ghana? An indicative entry reference is from about GH₵50 on Jiji listings — a starting unit price, not an installed door. The installed figure depends on size, glazing and panel, system, finish and fixing, so it follows a survey. Treat the listing figure as an indicative entry anchor.
What is the installed price per aluminium window in Ghana? There is no single reliable installed per-window figure — it depends on the opening, so we quote on survey. A small single-glazed sliding window and a large double-glazed tilt-and-turn are very different numbers. The listing anchors (windows from ~GH₵100, doors from ~GH₵50) are unit starting points only; the firm figure follows a survey.
What makes one aluminium window cost more than another? Five things: opening size; glazing (single lower-priced, double cuts heat and noise); system (sliding typically lower-priced, casement more, tilt-and-turn more again); thermal break (costs more, improves thermal performance); and finish (powder-coat or anodised). We confirm each against the building so the quote reflects the actual window, not a headline listing.